Top 10 Kair Gravity Grille 150mm UK – Home & Garden Store

As an Amazon Associate I earn from qualifying purchases.

1. Kair

#ad

Kair Brown Gravity Grille 183mm External Dimension with 150mm, Ducting Air Vent, 6 inch Round Rear Spigot and Not-Return Shutters

#ad
Kair #ad - Static pressure drop in Pascals: 15 l/s = 6. 91 pa - 30 l/s = 8. 76 pa - 60 l/s = 11. 10 pa. Non-return shutter flaps close automatically when not in use. 183mm x 183mm external dimension with 6 inch / 150mm round male rear spigot on the back of the grille for indoor or outdoor use.

Suitable to use in compliance with part f building regulations. Perfectly suited bathroom or Kitchen extractor fan, or In-Line Extract Fan. This grille can be used as a part of a long ductwork run for a variety of purposes including whole house ventilation, air conditioning, positive input, HVAC, passive ventilation, and Heat Recovery Systems.

Gravity flap - no need for springs that could break. Free air: 16, 000mm2. Easy to install, hydroponics fan, just push-fit duct and fittings together. Stops unpleasant odours, noises, or draughts flowing back through your duct. Airflow performance independently tested by BSRIA or BRE. Brown plastic ducting air inlet / air outlet with gravity Shutters.
BrandKair #ad
ManufacturerKair #ad
Height18.49 cm (7.28 Inches)
Length5.51 cm (2.17 Inches)
Weight0.13 kg (0.29 Pounds)
Width18.49 cm (7.28 Inches)
Part NumberDUCVKC292-BR

2. Kair

#ad

Kair Wall Vent 150mm, 6 inch Round Rear Spigot Stainless Steel Ventilation Gravity Grille

#ad
Kair #ad - Weather seal to prevent unwanted leaks and drafts with 4 gravity flaps. Stylish and durable with an unobtrusive profile. Easily connects to either flexible hose or rigid ducting. 150mm / 6 inch round rear spigot. Stainless steel exhaust outlets with gravity flaps. Its stainless-steel construction protects against weathering such as; corrosion and rusting, prolonging the lifetime of the grille.
BrandKair #ad
ManufacturerKair #ad
Part NumberDUCSS152

3. Kair

#ad

Kair Black Gravity Grille 155mm External Dimension with 100mm, 4 inch Round Rear Spigot and Not-Return Shutters Ducting Air Vent

#ad
Kair #ad - Static pressure drop in Pascals: 15 l/s = 1094 pa - 30 l/s = 18. 59 pa - 60 l/s = 24. 21 pa. Perfectly suited bathroom or Kitchen extractor fan, or In-Line Extract Fan. Stops unpleasant odours, noises, or draughts flowing back through your duct.

Black plastic ducting air inlet / air outlet with gravity Shutters. Suitable to use in compliance with part f building regulations. Gravity flap - no need for springs that could break. Easy to install, hydroponics fan, just push-fit duct and fittings together. Non-return shutter flaps close automatically when not in use. 155mm x 155mm external dimension with 4 inch / 100mm round male rear spigot on the back of the grille for indoor or outdoor use.

Airflow performance independently tested by BSRIA or BRE. Free air: 7200mm2. This grille can be used as a part of a long ductwork run for a variety of purposes including whole house ventilation, air conditioning, passive ventilation, HVAC, positive input, and Heat Recovery Systems.
BrandKair #ad
ManufacturerKair #ad
Height15.5 cm (6.1 Inches)
Length15.5 cm (6.1 Inches)
Weight0.08 kg (0.18 Pounds)
Width4 cm (1.57 Inches)
Part NumberDUCVKC243-BK
ModelDUCVKC243-BK

4. Kair

#ad

Kair White Gravity Grille 155mm External Dimension Ducting Air Vent with 125mm, 5 inch Round Rear Spigot and Not-Return Shutters

#ad
Kair #ad - Static pressure drop in Pascals: 15 l/s = 6. 43 pa - 30 l/s = 9. 91 pa - 60 l/s = 11. 25 pa. Gravity flap - no need for springs that could break. Perfectly suited bathroom or Kitchen extractor fan, or In-Line Extract Fan.

This grille can be used as a part of a long ductwork run for a variety of purposes including whole house ventilation, passive ventilation, air conditioning, positive input, HVAC, and Heat Recovery Systems. Suitable to use in compliance with part f building regulations. Non-return shutter flaps close automatically when not in use. Stops unpleasant odours, noises, or draughts flowing back through your duct.

155mm x 155mm external dimension with 5 inch / 125mm round male rear spigot on the back of the grille for indoor or outdoor use. Free air: 11, 600mm2. Airflow performance independently tested by BSRIA or BRE. White plastic ducting air inlet / air outlet with gravity Shutters. Easy to install, hydroponics fan, just push-fit duct and fittings together.
BrandKair #ad
ManufacturerKair #ad
Height15.5 cm (6.1 Inches)
Length15.5 cm (6.1 Inches)
Weight0.08 kg (0.18 Pounds)
Width4 cm (1.57 Inches)
Part NumberDUCVKC270

5. Kair

#ad

6 inch Rear Spigot, Kair White Louvred Wall Vent Grille 183mm External Dimension with Flyscreen and Round 150mm

#ad
Kair #ad - Easy to install, hydroponics fan, just push-fit duct and fittings together. White plastic ducting air outlet / inlet square grille with fixed louvres and anti insect mesh / flyscreen.

Louvre can be flicked open with flat head screwdriver for ease of installation and to allow cleaning of insect screen. Perfectly suited bathroom or Kitchen extractor fan vent, or In-Line Extract Fan. 183mm x 183mm external dimension with 6 inch / 150mm round male rear spigot on the back of the grille can be cut off if flat surface preferred. Fits inside kair 150mm round female duct pipe part: dUCVKC267 or 152mm flexible hose Part: DUCP0092/152/35.
BrandKair #ad
ManufacturerKair #ad
Part NumberDUCVKC275F/S

6. Kair

#ad

Kair Brown Cowled Outlet Grille 183mm External Dimension Wall Vent with 150mm, 6 inch Round Rear Spigot and Wind Baffle Backdraught Shutter

#ad
Kair #ad - Note: the cowl comes with slightly bent sides. Just push-fit duct and fittings together. Cowl protects against driving rain and gusts of wind entering your property via the duct run. You will need to click fit it back into place. This is to enable easy fitting into the back plate. Designed for use with 150mm / 6 inch round ducting. Damper flap can be closed to help reduce unpleasant odors, noises, or draughts flowing back through your duct. Kair cowled vent with damper flap 183mm x 183mm external dimension with 150mm round rear spigot.
BrandKair #ad
ManufacturerKair #ad
Part NumberDUCVKC280-BR

7. Kair

#ad

6 inch Rear Spigot Stainless Steel Grille with Backdraft Shutter to Protect Against Insects and Wind Noise, Kair Cowled External Vent 150mm

#ad
Kair #ad - Contains a weatherproof seal to eliminate leaks and drafts. Ideal for both domestic and commercial extract applications. Superior alternative to plastic cowls and grilles with integral back draft shutter for protection against insects and unwanted sounds. Ideal for venting tumble dryer, air conditioning units, kitchen fans, bathroom fans, electric dryers or cooker hoods. Stainless steel external vent with 145mm rear spigot for use with 150mm ducting systems.
BrandKair #ad
ManufacturerKair #ad
Height15.01 cm (5.91 Inches)
Length18.01 cm (7.09 Inches)
Weight0.5 kg (1.1 Pounds)
Width18.01 cm (7.09 Inches)
Part NumberDUCSS153

8. EUROPLAST

#ad

190x190mm / 150mm White Plastic Cowled Hooded Air Ventilation Wind Baffle Wall Grille 7x7inch / 6inch Air Vent Grille Gravity Flap External Ventilation Cover Ducting

#ad
EUROPLAST #ad - Bolts to the outer wall or inserted into an identical diameter ventilation pipe. Exhaust hood made of ABS with flange and umbrella is designed for attaching to the outer wall. With connection bracket, ABS plastic, weatherproof. Made in europe - manufacturer Europlast. Pipe connection: diameter 150 mm, with integrated backflow flap.
BrandEUROPLAST #ad
ManufacturerEUROPLAST #ad

9. Blauberg

#ad

6 inch External Ducting Air Vent with Round Spigot and Non-Return Shutters for Kitchen Ceiling Extractor Fans Inline Bathroom Fan Duct Cover Exterior Wall, Blauberg Grey Gravity Grille 150 mm

#ad
Blauberg #ad - Gravity flap - no need for springs that could break. Gravity operated flaps that close when Not in use. Non-return shutter flaps close automatically when not in use. Suitable to use in compliance with part F building regulations.

Easy to install, hydroponics fan, just push-fit duct and fittings together. Perfectly suited bathroom or kitchen extractor fan, or in-line extract fan. This grille can be used as a part of a long ductwork run for a variety of purposes including whole house ventilation, passive ventilation, HVAC, positive Input, air conditioning, and heat recovery systems. Plastic ducting air inlet/ air outlet with gravity shutters - 6 inch/ 150mm round male spigot on the back of the grille for indoor or outdoor use. Stops unpleasant odours, noises, or draughts flowing back through your duct. Designed to terminate your extract duct to an external wall.
BrandBlauberg #ad
ManufacturerBlauberg UK #ad
Height15 cm (5.91 Inches)
Length14 cm (5.51 Inches)
Width2 cm (0.79 Inches)
Part NumberDECOR 185X185/150G GREY
ModelDECOR 185X185/150G GREY
WarrantyTwo-year warranty from date of purchase against defects in materials and workmanship.

10. Blauberg UK

#ad

Blauberg UK 6 inch 150 mm Round Plastic Ducting and Fittings for Extractor Fan Ventilation, Cowled Grille with Shutter, 150mm, Black

#ad
Blauberg UK #ad - Removable hood for easy cleaning. Cowled hooded wall vent baffle with removable single blade back draught shutter. Ideal for cooker hoods bathroom and kitchen extractor fans. Suitable for 150mm 6 inch ducting and extractor fan connections.
BrandBlauberg UK #ad
ManufacturerBlauberg UK #ad
Height50 cm (19.69 Inches)
Length50 cm (19.69 Inches)
Weight0.1 kg (0.22 Pounds)
Width50 cm (19.69 Inches)
Part NumberDECOR185X185/150HKBLACK
ModelDECOR185X185/150HKBLACK
Warranty5 Years